quartz/content/Projects/nvidia-linux.md

title	tags	date	lastmod	draft
NVIDIA on Linux	linux difficulty-easy foss	2024-03-26	2024-10-06	false

The year is 2024. NVIDIA on linux is in a usable state! Of course, there are still many pitfalls and options required for a good experience. This page documents every configuration trick I've used and has all the resources that you need to use it yourself.

My Setup

I have an RTX 3060 Ti connected to an eGPU dock that I use with my Framework laptop over Thunderbolt. More info Projects/my-computer.

Having an eGPU means that I need a way to configure the egpu on boot so that I can properly use the external display when not docked. There are two important programs to note:

• egpu-switcher: On boot, checks whether the eGPU is detected and adds an xorg config designed to allow the display session to start if so. Can run hook scripts both when the egpu is detected and not detected, which allows customization.
  • I use the hook scripts to overwrite the default xorg config file that it adds with the one in #X11.
• all-ways-egpu: On boot, configures the eGPU as the primary display under Wayland. Lots of CLI customization. I've had the best experience using Method 2 and Method 3 at the same time.

Kernel Drivers

Start by installing the nvidia driver that your distro bundles (or a community project).

If you use a non-default kernel: make sure that the driver uses dkms, not [a]kmods.

If your workflow requires the NVENC codec: opt for the package containing all proprietary blobs rather than the package with the open source kernel driver.

I recommend adding nvidia.NVreg_OpenRmEnableUnsupportedGpus=1 nvidia.NVreg_PreserveVideoMemoryAllocations=1 nvidia_drm.modeset=1 to your kernel parameters. These help with hardware detection, sleep, and display configuration, respectively.

• If you do add the third option, you will only be able to set the first two by kernel parameters. This is because for modesetting drivers, options set in modprobe .conf files have no effect.

You should also blacklist the Noveau video driver. You can do this with kernel parameters through modprobe.blacklist=noveau (effective next boot), or in your module config files (effective after rebuilding the initramfs).

X11

In my opinion (and with my hardware), X11 is more usable right now with nvidia cards.

This config recipe will set the same options for every device using the nvidia drivers:

# File: /etc/X11/xorg.conf.d/10-nvidia.conf
Section "OutputClass"
    Identifier "nvidia"
    MatchDriver "nvidia-drm"
    Driver "nvidia"
    Option "AllowEmptyInitialConfiguration" # Prevent crashes on startup
    Option "SLI" "Auto" # Configure system based on no. of gpus present
    Option "BaseMosaic" "on" # Optimize multi-display rendering
    Option "TripleBuffer" "off" # Unnecessary performance overhead
    Option "ForceFullCompositionPipeline" "on" # Fixes screen tearing. 
    # Option "ForceCompositionPipeline" "on" # If you still experience tearing with ForceFullCompositionPipeline, turn that setting off and turn this one on
    # Option "CoolBits" "28" # Only necessary for overclocking/undervolting. 
                             # If the GPU is too old, use the value 20 instead.
                             # If you don't want to overclock, you don't need to touch this line!
EndSection

The options for the nvidia driver are documented here.

Wayland

[!info] Full disclosure Wayland is not yet usable on NVIDIA in my opinion, but it's so close now!

On both Gnome and Plasma, I've managed to get the display working simultaneously with an Intel-driven internal display on 6.x kernels and 5xx drivers as long as I've enabled all-ways-egpu and kernel modesetting.all-ways-egpu is less necessary nowadays, and in my modern setup I elect to go without it.

For more stable logins, ensure that your display manager (GDM for gnome, defaults to SDDM on Plasma) is using Wayland.

# In /etc/gdm/custom.conf
[daemon]
WaylandEnable=true

# In /etc/sddm.conf.d/sddm.conf
# [Wayland]
# EnableHiDPI=true # 4K, framework laptop, etc

[General]
DisplayServer=wayland

XWayland will have degraded performance on NVIDIA cards. On Arch specifically, some people have found success mitigating this with wayland-protocols, { merged -ed. } mutter-vrr on GNOME, and xorg-xwayland-git. That combination didn't work for me when I tried it in April 2024, and with a few other wayland issues compounding the poor performance, I swapped back to X11. I do periodically check on Wayland though, so expect updates.

August 2024 did not yield any new results. However, September 2024: Explicit sync is supported across Wayland, XWayland, Mutter, KWin, AND the graphics card drivers. The performance problems with NVIDIA are mostly gone. I was able to run games at X11 fidelity with maybe 10 less FPS, and it's no longer choppy or flickery. Input latency is the final issue, and I experienced it even while using LatencyFleX. I'm hopeful that once Mutter gets fullscreen tearing support in Wayland, I can finally make the switch. I haven't tested in Plasma again, but it's definitely possible that Plasma is now usable as a Wayland gaming DE.

GTK apps not opening

GTK 4.16 (in conjunction with the release of GNOME 47) swapped to Vulkan renderer by default. Vulkan has issues creating surfaces across display devices on Wayland, which is called PRIME in the X11 world. You may experience crashes in GTK apps for this reason. Fix:

# In /etc/environment
GSK_RENDERER=ngl

More Resources

Allow me to dump every other page that I've needed to comb through for a working nvidia card.

• Archwiki - NVIDIA (useful on more distros than Arch!)